Use of cookies

Daimler uses cookies to optimize the design of this website and make continuous improvements. By continuing your visit the website, you consent to the use of cookies.

Further details can be found in 'Cookies'.

320.1   Specified anti-corrosion protection/antifreeze (Cars, VAN) - Overview

Select Sheet 
Overview  

Prescribed specification for service fill anti-corrosion agents/antifreeze
Car/van engines - Mercedes-Benz, AMG, Maybach, smart
Change interval Whatever applies first, must be observed.
MB Specifications for Operating Fluids, sheet
325, 326
.0
.6
.7
Gasoline engines
M 112, 113



15 years/250,000 km
M 133



15 years/250,000 km
M 137



15 years/250,000 km
M 15x



15 years/250,000 km
M 176



15 years/250,000 km
M 177



15 years/250,000 km
M 200.71 (Citan)


2.)
6 years/160,000 km
M 256



15 years/250,000 km
M 260



15 years/250,000 km
M 264



15 years/250,000 km
M 266
1.)


15 years/250,000 km
M 27x
1.)


15 years/250,000 km
M 281 (smart model 453.0/3/4)


2.)
6 years/160,000 km
M 285



15 years/250,000 km
Diesel engines
OM 607 (Citan)


2.)
6 years/160,000 km
OM 611, 612, 613
1.)


15 years/250,000 km
OM 62x
1.)


15 years/250,000 km
OM 639
1.)


15 years/250,000 km
OM 640
1.)


15 years/250,000 km
OM 651
1.)


15 years/250,000 km
OM 654



15 years/250,000 km
OM 656



15 years/250,000 km
OM 699.77 (X-Class)


2.)
6 years/160,000 km
Electric motors
Smart electric drive


2.)
6 years/160,000 km
All other model series



15 years/250,000 km
Fuel cells
All major assemblies
See F-CELL terminal point

Notes:

As a general rule, the approved anti-corrosion agents/antifreeze (MB sheet) can be found in the respective operator's manual for the vehicle.

This table contains only the anti-corrosion agents/antifreeze for engines that were in production in the period of the last 15 years.

Information on unlisted or older engine models can be found in the vehicle's operator's manual or the maintenance procedures.

Ensure that concentrated anti-corrosion agents/antifreeze (MB sheets 325.x) are mixed with suitable water as per the specification from MB sheet 310.1 before being used in the cooling circuit. Ready-mixes (MB sheets 326.x) may not be mixed with water.

● Approval

- May not be used.
  1. Restriction: For all vehicles with manufacturing date up to and including April 2014.

  2. Restriction: Not compatible with the products according to sheet 325.0/6, 326.0/6.